The Zanxis No-Partition Medium Efficiency Filter is a mini-pleat panel filter designed for medium-efficiency air filtration in HVAC and cleanroom applications. It captures particles down to the micron range using glass fibre or PTFE media, making it suitable for commercial buildings, semiconductor fabs, pharmaceutical cleanrooms, hospitals, and data centres. With efficiency grades from M6 to E11, it serves both as a pre-filter for high-efficiency systems and as a standalone filter for spaces requiring medium air quality.
| Item | Detail |
|---|---|
| Product type | High-efficiency panel filter without partitions (mini-pleat panel filter) |
| Core material | High-quality fibreglass or PTFE |
| Frame material | Anodised aluminium profile or stainless steel |
| Separator | High-quality hot-melt adhesive |
| Efficiency grade | M6 – E11 (covering medium to sub-high efficiency) |
| Typical applications | Microelectronics and semiconductor cleanrooms, pharmaceutical GMP workshops, hospital operating theatres, high-end commercial HVAC systems, FFU units |
| Standard sizes and airflow (W × H × D) | 305 × 610 × 50 mm (rated airflow 350 CMH) 610 × 610 × 50 mm (rated airflow 750 CMH) 1170 × 570 × 50 mm (rated airflow 1300 CMH) 1170 × 1170 × 70 mm (rated airflow 3600 CMH) *More sizes available with 50 mm or 70 mm depth options |
| Customisation | Based on the company's 20,000 m² clean workshop and CNAS national testing centre, custom non-standard sizes and OEM services are available upon request. |
Before selecting this filter, it is important to confirm several key parameters to ensure it meets your system's requirements. The efficiency grade should be verified according to EN 779 or ISO 16890 standards; Zanxis offers F5, F6, F7, and F8 grades (corresponding to ePM10, ePM2.5, and ePM1) with filtration efficiency of 60%–95% for particles ≥0.5 μm. The initial pressure drop at rated airflow must be checked against your fan capacity. The filter's dust holding capacity determines service life and should be evaluated based on your specific dust loading conditions. The frame material (anodised aluminium or stainless steel) should be chosen to match the installation environment, and the overall dimensions must fit your filter housing. Zanxis provides CNAS laboratory test reports for efficiency, pressure drop, and dust holding capacity to support these confirmations.
To ensure the filter performs as specified, Zanxis recommends the following sample verification workflow:
This workflow typically takes 2–3 weeks for sample delivery, depending on customisation complexity.
The Zanxis No-Partition Medium Efficiency Filter features a mini-pleat design that maximises filtration area within a compact frame. The glass fibre or PTFE media is pleated and separated by hot-melt adhesive, eliminating the need for aluminium separators and reducing weight. The anodised aluminium or stainless steel frame provides structural integrity and corrosion resistance. This construction results in low initial pressure drop, high dust holding capacity, and space-saving dimensions. The filter is suitable for use in commercial HVAC systems, cleanroom pre-filtration, FFU units, and industrial applications. It can be installed in standard filter frames or custom housings. The filter's efficiency ranges from M6 to E11, making it adaptable to various air quality requirements. Regular replacement is recommended every 6–12 months, depending on operating conditions.
Zanxis operates a CNAS-accredited laboratory that issues test reports for filtration efficiency, dust holding capacity, and pressure drop. These reports provide verifiable data for your validation and regulatory needs. The manufacturing facility covers 50,000 m², including six clean workshops totalling 20,000 m², where filters are produced under controlled conditions. The company holds IATF 16949 (obtained in 2024) and ISO 9001, ISO 14001, and ISO 45001 certifications. Products comply with REACH and RoHS regulations, and compliance documents are available upon request. With over 20 years of experience in filtration R&D and manufacturing, Zanxis has developed more than 1000 filter solutions and exports to Europe, the US, Japan, and South Korea. Quality control follows IQC, IPQC, and OQC procedures throughout production.
To request samples, test reports, or a quotation, please provide the following details: your device or vehicle model, required filter dimensions or a drawing, airflow or water flow rate, operating conditions (temperature, humidity, dust concentration), and estimated quantity. Our team will respond with a tailored proposal. Contact us to discuss your filtration requirements.
Yes, Zanxis provides CNAS laboratory test reports for each sample, covering efficiency, initial pressure drop, and dust holding capacity. These reports are generated in our CNAS-accredited laboratory. They can be used for your internal validation or third-party verification.
Sample validation typically takes 2–3 weeks from requirement confirmation to sample delivery. This includes sample production and testing. The exact timeline depends on customisation complexity. We recommend planning for this duration when scheduling your project.
For standard sizes, the MOQ is generally 50–100 pieces. Custom sizes have an MOQ of 100–200 pieces, depending on structural complexity. We can negotiate flexible terms for new customers and sample orders. Please contact us with your specific requirements.
Standard products are typically shipped within 7–15 days. Custom orders usually require 25–35 days for production. Our automated production lines and raw material inventory support urgent orders and long-term supply. Lead times may vary based on order volume and specifications.
Under typical commercial ventilation conditions, the filter should be replaced every 6–12 months. The actual replacement interval depends on airflow, dust concentration, and operating hours. Our CNAS laboratory can provide dust holding capacity test reports to help determine the optimal replacement schedule for your specific application.
Yes, Zanxis offers custom sizes, frame materials (anodised aluminium or stainless steel), efficiency grades (M6–E11), and branding. Our engineering team can design filters to fit your housing and operating conditions. We have developed over 1000 filter solutions and can provide samples for validation. Customisation typically requires 2–3 weeks for sample delivery.
The filter is manufactured in a facility certified to IATF 16949 (2024) and ISO 9001, ISO 14001, and ISO 45001. Products comply with REACH and RoHS regulations. CNAS test reports are available for performance verification. These certifications and reports support compliance with international market requirements.
To request a sample and quotation, please provide your device or system model, required dimensions or drawing, airflow rate, operating conditions, and estimated quantity. Contact us through our website or email. Our team will respond with a tailored proposal and sample delivery options.